01848A DVD C500 C550 XAA-03[1], INSTRUKCJE OBSŁUGI

01848A DVD C500 C550 XAA-03[1]

01848A DVD C500 C550 XAA-03[1], INSTRUKCJE OBSŁUGI

[ Pobierz całość w formacie PDF ]
DVD-C500
DVD-C550
DVD Player
User Manual
imagine
the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at
www.samsung.com/global/register
AK68-01848A(03)
ENGLISH
Getting Started
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched: particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long peroids of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Precautions
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on. The user is encouraged to try to
correct the interference by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment
Regulations.
FDA Laser :
“Complies with 21CFR 1040.10 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.”
CALIFORNIA USA ONLY :
This Perchlorate warning applies only to primary CR (Maganese Dioxide) Lithium coin cells in the
product sold or distributed ONLY in California USA “Perchlorate Material - special handling may
apply”, See www.dtsc.ca.gov/hazardouswaste/perchlorate.
CAUTION
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
Notes:
• This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.
• This DVD player is designed and manufactured to respond to the Region Management Information.
If the Region number of a DVD disc does not correspond to the Region number of this DVD player, the DVD
player cannot play the disc.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LÁSER CLASE 1
This symbol indicates that dangerous voltage
consisting a risk of electric shock is present
within this unit.
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
Do not install this equipment in a confined space such as a bookcase or similar unit.
WARNING :
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
Note to CATV system installer
:
This reminder is provided to call CATV system installer’s attention to Article 820-40 of the
National Electrical Code (Section 54 of Canadian Electrical Code, Part I) that provides guidelines
for proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building as close to the point of cable entry as practical.
Caution
: FCC regulations state that any unauthorized changes or modifications to this equipment
may void the user’s authority to operate it.
• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
• If this power supply is used at 240V ac, a suitable plug adapter should be used.
Handling Cautions
• Before connecting other components to this player, be sure to turn them all off.
• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player’s
internal parts may be damaged.
• Do not put a flower vase filled with water or any small metal objects on the player.
• Be careful not to put your hand into the disc tray.
• Do not place anything other than the disc in the disc tray.
• Exterior interference such as lightning and static electricity can affect normal operation of this player. If this occurs,
turn the player off and on again with the POWER button, or disconnect and then reconnect the AC power cord to
the AC power outlet. The player will operate normally.
• Be sure to remove the disc and turn off the player after use.
• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long periods of time.
• Clean the disc by wiping in a straight line from the inside to the outside of the disc.
• The Main plug is used as a disconnect device and shall stay readily operable at any time.
2
Disc Storage
Use care when storing discs. The data on the discs is highly vulnerable to mishandling.
• Do not expose to direct sunlight.
• Keep in a cool, ventilated area.
• Store vertically.
• Keep in a clean protection jacket.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
Various On-Screen Menu
Functions
You can select various languages (Audio/Subtitle)
and screen angles while enjoying movies.
Progressive Scan
Progressive scan provides an improved picture
with double the scan lines of a conventional inter-
laced picture.
EZ VIEW (DVD)
Easy View enables picture adjustment to match
your TV's screen size (16:9 or 4:3).
Digital Photo Viewer (JPEG)
You can view Digital Photos on your TV.
Repeat
You can repeat a song or movie simply by press-
ing the REPEAT button.
MP3/WMA
This unit can play discs created from MP3/WMA files.
MPEG4 (DVD-C550 Only)
This unit can play MPEG4 formats within an avi file.
HDMI (High Definition Multimedia
Interface)
HDMI reduces picture noise by allowing a pure digital
video/audio signal path from the player to your TV.
CD Ripping (DVD-C550 Only)
This feature lets you copy audio files from a disc
into MP3 format on a USB device. (Audio CD only
(CD DA)).
Note
- These disc formats cannot be played on this player.
• DVD-ROM • DVD-RAM
• CD-ROM • CDV
• CDI • CVD
• CDGs (Plays audio only, not graphics. The
ability to play back may depend on recording
conditions.)
• DVD-R, +R
• CD-RW
• DVD+RW, -RW (V mode)
- The unit may not play certain CD-R, CD-
RW and DVD-R due to the disc type or
recording conditions.
COPY PROTECTION
Many DVD discs are encoded with copy
protection. Because of this, you should only connect
your DVD player directly to your TV, not to a VCR.
Connecting to a VCR results in a distorted picture from
copy-protected DVD discs.
This product incorporates copyright protection technol-
ogy that is protected by methods claims of certain U.S.
patents and other intellectual property rights owned by
Rovi Corporation and other rights owners. Use of this
copyright protection technology must be authorized by
Rovi Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Rovi Corporation. Reverse engineering or disassem-
bly is prohibited.
PROGRESSIVE SCAN OUTPUTS
(480p, 720p, 1080p)
YOU SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IF PROGRESSIVE SCAN PICTURE
PROBLEMS OCCUR, WE RECOMMEND THAT
YOU SWITCH THE CONNECTION TO THE
‘STANDARD DEFINITION’ (VIDEO) OUTPUT. IF
THERE ARE QUESTIONS REGARDING YOUR TV
SET’S COMPATIBILITY WITH THIS DVD PLAYER,
PLEASE CONTACT SAMSUNG'S CUSTOMER
SERVICE CENTER.
Accessories
AK59-00110A
)
Batteries for Remote Control (AAA Size) (AC43-12002H)
•
User’s Manual (AK68-01848A)
•
Video/Audio Cable (AC39-42001U & AC39-22017Z)
•
Remote Control (AK59-00084V/
•
Contents
GETTING STARTED
Precautions ........................................................ 2
General Features ............................................ 3
Description ..................................................... 4
Tour of the Remote Control ............................ 4
CONNECTIONS
Choosing a Connection...................................... 5
Connecting to a TV Using the HDMI Jack ......... 5
Connecting to a TV with a DVI Jack................... 5
Connecting to a TV Using the Component Jacks
(Progressive/Interlace) ............................................ 5
Connecting to a TV Using the Video Jack (Video) ... 5
Connecting to an Audio System (2 Channel,
Dolby Digital, MPEG2, or DTS Amplifier) ................ 5
BASIC FUNCTIONS
Playing a Disc..................................................... 6
Using the Search and Skip Functions................ 6
Using the Display Function ................................ 6
Using the Disc and Title Menu ........................... 7
Repeat Play ........................................................ 7
Slow Play............................................................ 7
ADVANCED FUNCTIONS
Adjusting the Aspect Ratio (EZ View)................. 7
Selecting the Audio Language ........................... 7
Selecting the Subtitle Language ........................ 7
Changing the Camera Angle .............................. 8
Using the Bookmark Function............................ 8
Using the Zoom Function................................... 8
Clips Menu for MP3/WMA/JPEG/MPEG4/CD
Audio .................................................................. 8
Folder Selection ................................................. 8
MP3/WMA/CD Audio Playback.......................... 8
MPEG4 Playback (DVD-C550 Only)................... 9
Playing Media Files using the USB HOST
feature (DVD-C550 Only).................................... 9
CD Ripping (DVD-C550 Only) ............................ 10
Picture CD Playback .......................................... 10
Picture CD Playback for HD-JPEG .................... 10
NAVIGATING THE SETUP MENU
Using the Setup Menu ..................................... 11
Setting Up the Display Options.......................... 11
Setting Up the Audio Options ............................ 12
Setting Up the System Options.......................... 12
Setting Up the Language Features .................... 13
Setting Up the Security Options ........................ 13
Setting Up the General Options ......................... 13
Setting Up the Support Options......................... 13
REFERENCE
Firmware upgrade .............................................. 14
Troubleshooting .................................................. 14
Specifications ..................................................... 15
Disc Markings
~
Play Region Number
NTSC broadcast system in U.S.A,
Canada, Korea, Japan, etc.
NTSC
Dolby Digital disc
Stereo disc
STEREO
DIGITAL
SOUND
Digital Audio disc
DTS disc
MP3 disc
Region Number
Both the DVD player and your DVD discs are
coded by region. These regional codes must
match in order for the disc to play. If the codes do
not match, the disc will not play.
The Region Number for this player is described
on the rear panel of the player.
DivX Certification (DVD-C550 Only)
General Features
Excellent Sound
Dolby Digital, a technology developed by Dolby
Laboratories, provides crystal clear sound reproduction.
Screen
You can view video in both regular (4:3) and wide-
screen (16:9).
Slow Motion
You can watch scenes in slow motion.
1080p Playback
This player upconverts regular DVDs for playback
on 1080p TVs.
Parental Control (DVD)
The parental control allows you to set the level
necessary to prevent children from viewing harm-
ful movies such as those with violence, adult
subject matter, etc.
DivX, DivX Certified,
and associated logos are trademarks of
DivXNetworks, Inc and are used under license.
“DivX Certified to play DivX video, including
premium content.”
3
Description
Tour of the Remote Control
8.
INFO Button
Front Panel Controls
DVD-C550
Used to
displays playback info banner.
1
2
3
4
5
6
7
8
9
10
9.
TV VOL (+, -) Buttons
15
16
DVD-C550
7
Controls the volume on a Samsung TV.
10.
SKIP Buttons (
/
)
17
18
Use to skip the title, chapter or track.
19
2
21
22
11.
STOP Button (
)
12. MENU Button
Brings up the DVD player’s menu.
13. ENTER/
π
/
†
,
√
/
®
Buttons
This button functions as a toggle switch.
14. TOOLS Button
Displays the current disc mode. It also lets you
access the Display function.
15. OPEN/CLOSE ( ) Button
To open and close the disc tray.
16. HDMI SEL. Button
HDMI Output resolution setup.
17. USB Button (DVD-C550 Only)/
ZOOM Button (DVD-C500 Only)
Enlarges the DVD Picture.
18. VIDEO SEL. Button
Changes video output mode.
19. REPEAT A-B Button
Allows you to repeat play a chosen section (A-B)
on a disc.
20. SUBTITLE Button
21. TITLE MENU Button
Brings up the Title menu.
22. AUDIO/TV SOURCE Button
Use this button to access various audio functions
on a disc. Use this button to select an available
source on a Samsung TV (TV mode).
23. PAUSE Button ( )
Pauses disc play.
24. SEARCH Buttons ( / )
Allows you to search forward/backward
through a disc.
25. TV CH (
23
24
25
26
27
DVD-C500
11
12
13
14
28
1. DISC TRAY
Place the disc here.
2. DISPLAY
Operation indicators are displayed here.
3. OPEN/CLOSE ( )
Press to open and close the disc tray.
4. STOP (
5.
PLAY/PAUSE (
)
Begin or pause disc play.
6. STANDBY/ON (
)
Turn On/Off the DVD Player.
7.
USB HOST (DVD-C550 Only)
DVD-C500
Connect a digital still camera, MP3 player,
memory stick, Card reader or other remov-
able storage devices.
1
2
4
5
6
7
8
9
10
15
16
)
Stops disc play.
17
18
19
2
21
22
Rear Panel
23
24
25
26
27
11
12
13
14
28
,
) Buttons
Use to select channels on a Samsung TV.
26.
PLAY Button (
)
Begins disc play.
27. RETURN Button
Returns to a previous menu.
28. EXIT Button
1. AUDIO OUT JACKS
- Use audio cables to connect to the Audio
input jacks of your television or audio/video
receiver
2. DIGITAL AUDIO JACK
- Use a coaxial digital cable to connect to a Dolby
Digital receiver or A/V Amplifier that contains a
Dolby Digital, MPEG2, or DTS decoder.
3. VIDEO OUT JACK
- Use a video cable to connect to the Video
input jack on your television.
4. COMPONENT VIDEO OUT JACKS
provide P
R
, P
B
and Y video.
- If
P-SCAN is set to “ON” in Video Output of
the General Menu, progressive scan mode will
work.
- If I-SCAN is set to “ON” in Video Output of the
General Menu, interlaced scan mode will
work.
5. HDMI OUT JACK
1.
DVD POWER Button
Turns the power on or off.
Exits the on-screen menu.
2.
DVD Button
Use to select the DVD player for operation.
Install Batteries in the Remote
Control
1.
Open the battery cover on the back of the
remote control.
2.
Insert two AAA batteries. Make sure that the polarities
(+ and -) are aligned correctly.
3.
Replace the battery cover.
3.
TV Button
Use to put the remote in TV mode in order to
operate a Samsung TV.
4.
EZ VIEW Button
Lets you easily adjust the aspect ratio of a
picture according to the screen size of your TV
(16:9 or 4:3).
- Use an HDMI cable to connect this jack to the
HDMI jack on your television for the best
quality picture.
5.
MARKER Button
6.
REPEAT Button
- If an HDMI cable is connected to an HDMI-
compatible TV, HDMI will be output automati-
cally from the player in about 10 seconds.
Allows you to repeat play a title, chapter, track, or
disc.
- Use these jacks if you have a TV with
Component Video in jacks. These jacks
7.
DISC MENU Button
Brings up the Disc menu.
4
Connections
Choosing a Connection
The following explains how to make connections commonly used to connect the DVD player with a TV and
other components. A diagram showing these connections is on the next page.
Before Connecting the DVD Player
- Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
- Refer to the user’s manual of the additional components (such as a TV) you are connecting for more infor-
mation on those particular components.
A. Connecting to a TV Using the HDMI Jack
HDMI provides the best picture quality of all the connections.
1.
Using an HDMI-HDMI cable (not included), connect the
HDMI OUT
jack on the rear of the DVD player to the
HDMI IN
jack of your TV.
2.
Press the input selector button on your TV remote control until the HDMI signal from the DVD player appears on
your TV screen.
Connecting to a TV with a DVI Jack
1.
Using an HDMI-DVI cable (not included), connect the
HDMI OUT
jack on the rear of the DVD player to the
DVI
IN
jack of your TV.
2.
Using the audio cables, connect the
AUDIO (red and white) OUT
jacks on the rear of the DVD player to the
AUDIO (red and white) IN
jacks of your TV. Turn on your DVD player and TV.
3.
Press the input selector button on your TV remote control until the DVI signal from the DVD player appears on
your TV screen.
HDMI VIDEO Specifications
When you press the
HDMI SEL.
button, the 480p, 720p, 1080i and 1080p resolutions are selected in order.
The first press of the
HDMI SEL.
button brings up the current resolution.
The second press allows you to change the HDMI output resolution.
- Depending on your TV, certain HDMI output resolutions may not work. Please refer to your TV user's
manual to determine the output resolutions of the player that will work on your TV.
- If an HDMI or HDMI-DVI cable is plugged into your TV, the DVD player’s output is set to HDMI automati-
cally about 10 seconds later.
- For better picture quality, set the HDMI output resolution to 720p, 1080i or 1080p.
- This player upconverts regular DVDs for playback on 1080p TVs. It does not play HD DVDs or Blu-Ray discs.
- If you connect an HDMI cable between a Samsung TV and this DVD player, you can operate this DVD player
using your TV remote control if the Samsung TV supports Anynet+(HDMI-CEC).
- If your TV has an
• Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal. However, when this player plays a DVD, it initially creates a
digital signal. For an analog TV to use this signal, it must be converted to an analog signal, using either a
digital-to-analog converter in the DVD player or an analog-to-digital converter in the TV. During this conver-
sion, the picture quality is degraded due to noise and signal loss. HDMI technology is superior because it
requires no conversion and is a pure digital signal from the player to your TV.
• What is HDCP?
HDCP (High-bandwidth Digital Content Protection) is a system for protecting DVD content outputted via
HDMI/DVI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a
display device (TV, projector, etc). Content is encrypted at the source device to prevent unauthorized copies
from being made.
B. Connecting to a TV Using the Component Jacks (Progressive/ Interlace)
- Connecting through the Component jacks lets you view video at the 480p (Progressive Scan) resolution.
- What is "Progressive Scan"?
Progressive scan has twice as many scanning lines per frame as interlaced (480i) output and provides
better and clearer picture quality.
1.
Using Component video cables (not included), connect the
COMPONENT VIDEO OUT
(PR, PB and Y)
jacks on the rear of the DVD player to the
COMPONENT IN
(PR, PB and Y) jacks of your TV.
2.
Using the audio cables, connect the
AUDIO (red and white) OUT
jacks on the rear of the DVD player to
the
AUDIO (red and white) IN
jacks of your TV. Turn on the DVD player and TV.
3.
Set the Video Output to
P-SCAN/I-SCAN
in the Display Setup menu. You can also use the
VIDEO SEL.
button to change the Video Output mode.
4.
Press the input selector button on your TV remote control until the Component signal from the DVD player
appears on the TV screen.
C. Connecting to a TV Using the Video Jack (Video)
1.
Using Video/Audio cables, connect the
VIDEO
(yellow)/AUDIO (red and white) OUT
jacks on the rear of
the DVD player to the
VIDEO (yellow)/AUDIO (red and white) IN
jacks of your TV.
2.
Turn on your DVD player and TV.
3.
Press the input selector button on your TV remote control until the Video signal from the DVD player
appears on the TV screen.
Notes
- Noise may be generated if the audio cable is placed too close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection section below.
- The number and position of the jacks on your TV may vary depending on your TV set. Please refer to
the user's manual of your TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT] [left] (white) jack of the
DVD player.
- If you press the VIDEO SEL. button when the DVD Player is in stop mode or no disc is inserted, the Video
Output mode changes in the following sequence: I-SCAN ➝ P-SCAN (Interlaced ➝ Progressive).
logo, then it supports the Anynet+ function.
D. Connecting to an Audio System (2 Channel, Dolby Digital, MPEG2, or
DTS Amplifier)
1.
Using the audio cables, connect the
AUDIO (red and white) OUT
jacks on the rear of the DVD player to
the
AUDIO (red and white) IN
jacks of the Amplifier. If using a Coaxial cable, connect the
DIGITAL AUDIO
(COAXIAL)
jack on the rear of the DVD player to the
DIGITAL AUDIO IN (COAXIAL)
jack of the Amplifier.
2.
Using the video signal cable(s), connect the
HDMI, COMPONENT
or
VIDEO OUT
jacks on the rear
of the DVD player to the
HDMI/DVI, COMPONENT
or
VIDEO IN
jack of your TV.
3.
Turn on your DVD player, TV, and Amplifier.
4.
Press the input select button of the Amplifier to select the audio input your DVD player is connected to in
order to hear sound. Refer to your Amplifier's user manual to set the Amplifier's audio input.
• HDMI (High Definition Multimedia Interface)
HDMI enables you to make a digital video and audio connection with a single cable. Using HDMI, the
DVD player transmits a digital video and audio signal which displays a vivid picture on a TV having an
HDMI input jack.
• HDMI connection description
HDMI connector - Video and audio are transferred digitally without compression (LPCM or Bit Stream data).
- The player outputs a pure digital signal to the TV through an HDMI cable.
- If your TV does not support HDCP (High-bandwidth Digital Content Protection), snow noise appears on the screen.
5
[ Pobierz całość w formacie PDF ]

Podobne

: Strona Główna

: !INSTRUKCJA INSTALACJI!, Mass Effect 2 + DLC (PL), Mass Effect 2 PL, Mass Effect 2 - DLC

: Świat Radio 03 - 2011, Świat Radio, Świat Radio 2011

: (Nierządnica 03) - Testament Nierządnicy - Iny Lorentz, Lorentz Iny

: 01 info-skrot, █▬█ █ ▀█▀ RADARY POLICYJNE - instrukcje, Radary- anuluj sobie mandat

: #0520 – Getting Directions and Parking Instructions, - Ang, mater, ESL Podcast McQuillan Jeff mp3+PDF

: [Web] GT-S8500 UM Open Polish Rev.1.0 100625, Instrukcje